All Companies

Advanced Illumination, part of Exaktera, was established in 1993 and is headquartered and has its operating facility in Rochester, Vermont USA. The company offers its customers complete illumination solution for their unique lighting requirements. With its extensive experience in design and manufacturing LED solutions, Advanced Illumination has developed unique expertise to solve the most difficult lighting challenges for its customers. For more information visit www.advancedillumination.com.

Alpha Omega Instruments, part of Process Insights, manufacturers and designs solutions for process measurement and analysis. The product portfolio consists of trace and percent oxygen analyzers and transmitters, safety monitors (oxygen deficiency and carbon dioxide) carbon dioxide analyzers, and moisture monitors. They are used by industrial, government, and educational institutions around the world for process optimization and safety applications. For more information visit www.aoi-corp.com.

AMS Alliance, a product brand of KPM Analytics, is dedicated to developing and manufacturing wet chemistry analyzers, reagents, and testing equipment for food & beverage, medical diagnostics, and environmental industries. AMS Alliance manufacturing facilities are located in Europe and the U.S.A. For more information, visit
www.kpmanalytics.com/brands/ams-alliance.

ATOM Instrument, part of Process Insights, is headquartered in Houston, TX and manufactures laboratory and online elemental analyzers for total sulfur-nitrogen applications in liquids, solids and gases, providing practical and innovative measurement solutions to the petroleum, petrochemical and pipeline industries. ATOM’s total sulfur analysis is based on Excimer UV Fluorescence technology, a patented and proprietary technology. The benefits of using this technology are numerous allowing analyzers to be designed for ease-of-use, reduced maintenance, and increased reliability. For more information, visit www.atominstrument.com.

Bruins Instruments, a product brand of KPM Analytics, provides high-resolution NIR analyzers. Founded in Munich in 1979, Bruins began manufacturing spectrophotometers for research, universities and institutes and expanded into analytical instruments for the agriculture and food industry in 1982. Since then, Bruins products have been dedicated to the agro, meat, and food industries by providing precision products at an attainable cost for companies of all sizes. To find out more about Bruins Instruments go to www.kpmanalytics.com/brands/bruins-instruments.

CHOPIN Technologies, a product brand of KPM Analytics, is specialized in methods and equipment for the quality control of cereals, flours, and their by-products. CHOPIN products and software are dedicated to cereal and baking industries needing to carry out analyses to satisfy operational requirements and current regulations and to meet customer specifications. For more information, visit
www.kpmanalytics.com/brands/chopin-technologies.

COSA Xentaur, part of Process Insights, combines the strength of over 30 years of COSA Instruments sales, service and application support and experience with Xentaur Corporations innovative measurement solutions. Its portfolio ranges from dew point measurement solutions, analytical laboratory equipment, NMR technology, WOBBE and BTU analyzers. As a reliable partner, COSA Xentaur creates trustful relationships to help its customers in virtually all industries to be more successful in implementing innovative measurement solutions. With its high-value products and intelligent solutions, COSA Xentaur delivers robust, cost effective instrumentation systems exceeding customer measurement requirements. For more information, visit www.cosaxentaur.com.

CMC-Kuhnke, part of Industrial Physics, is focused on providing the best can measurement equipment possible – often introducing ground breaking new products such as the world's first computerized double seam inspection system. Today the company provides state-of-the-art gauges, testers, and software to reduce the cost of can-making, and increase the efficiency of food canning and beverage bottling. To support its ever-growing international customer base CMC-KUHNKE has the widest network of agents in the industry. In addition to Head offices in Berlin and New York, CMC-KUHNKE has opened regional support offices in Mexico City, Mexico, and in Wisconsin, USA. For more information, visit www.cmc-kuhnke.com.

C&W Specialist Equipment Ltd., part of Industrial Physics, is a global leader in the development and manufacture of corrosion test chambers. Accelerated corrosion and environmental test chambers provide controlled environments to test and simulate how components will perform when exposed to natural weathering elements. For more information, visit www.cw-spec.com.

Davis Instruments, part of AE Monitoring, was founded in 1963 and has become recognized throughout the world for manufacturing affordable, precision weather and marine instruments to meet the needs of value-minded professionals and consumers who demand the best. From the sleek, full-featured Vantage Vue to the customizable, industrial-grade Vantage Pro2 to the market leading Windex Wind Vane, Davis Instruments has engineered products for meteorologists, educators, farmers, students, and discerning hobbyists. For more information, visit www.davisinstruments.com.

Eagle Vision, part of Industrial Physics, delivers high-precision computer vision systems to global companies seeking to deliver the highest quality to their customers. With its Basic Scout product line, Eagle Vision delivers highly-sensitive in-line inspection systems to the food, beverage and packaging industries. Eagle Vision is the market leader of inspection systems for the baby food supply chain and confectionery markets. For more information, visit www.eaglevision.nl.

Earth Networks, part of AE Monitoring, helps organizations mitigate financial, operational and human risk by providing environmental intelligence from the world’s largest hyperlocal weather network. Schools, airports, sports teams, utilities and government agencies rely on our early warning solutions to safeguard lives, prepare for weather events and optimize operations. Companies across all industries use our weather data to automate decisions regarding risk management, business continuity, and asset protection. For more information, visit www.earthnetworks.com.

Extrel CMS, part of Process Insights, was founded in 1964 and is based in Pittsburgh, PA. Extrel is a leading manufacturer of research and process mass spectrometers, residual gas analyzers, systems and components based on quadrupole mass spectrometry technology. The company’s analytical and process instruments are used in both, industry for process optimization and regulatory compliance as well as research, where Extrel’s instruments are used by Nobel Laureates and many others in a variety of applications worldwide. More information about the company can be found by visiting www.extrel.com.

EyePro System, a product brand of KPM Analytics, is a leader in the field of vision technology for the baking and snack food industry. EyePro vision systems provide integrated solutions for product inspection, process control, and product handling. The systems are designed to improve product quality, optimize production processes, reduce waste, and maximize line efficiency. For more information, visit
www.kpmanalytics.com/brands/eyepro-system.

Fibro System, part of Industrial Physics, develops innovative technology to measure dynamic surface properties of materials. Examples include contact angle, absorption, dimensional stability, smoothness, print quality and moisture. Featured products are the Pocket goniometer PGX + and the dynamic absorption tester DAT. For more information, visit https://fibro-system.com.

FTS Forest Technology Systems, part of AE Monitoring, was founded in 1980 with a focus on the fire weather meteorological niche. Since then, FTS has become a leading manufacturer of remote environmental monitoring systems, instrumentation and communications technology for the Hydrology, Fire Weather and Meteorology industries. FTS is the world leader in environmental monitoring solutions for fire weather. The company’s headquarters, research and design lab, and manufacturing plant are located in Victoria, British Columbia, with a branch office in Blaine, Washington. For more information, visit www.ftsinc.com.

Guided Wave, part of Process Insights, was founded in 1983 and is based in Rancho Cordova, California. The company is a leading designer and manufacturer of complete analytical systems utilizing proven Near Infrared (“NIR”) and Ultraviolet / Visible (“UV-VIS”) spectroscopic technologies. Today Guided Wave is the only process NIR manufacturer that provides complete, optically-matched systems that yield the best throughput efficiency and long-term performance that exceed industry standards. More information about the company can be found by visiting www.guided-wave.com.

High Sierra Electronics, part of AE Monitoring, was founded in 1992 and is headquartered in Grass Valley, California, with additional offices in San Antonio and Fort Worth, TX, and Louisville, KY. High Sierra specializes in flood warning sensors, equipment, and transmitters for public and improved traffic safety. For more information visit www.hsierra.com.

Hygrocontrol, part of Process Insights, is a leading brand dedicated to the measurement of humidity and temperature in industrial and process applications using proprietary high-precision relative humidity and temperature meters. The company also offers comprehensive repair and calibration services worldwide, as well as high-precision, tight-fitting laser welding capabilities for moisture and temperature sensors. For more information, please visit www.hygrocontrol.de.

Knight, part of CFS Technologies, was founded in 1972 and is headquartered in Irvine, California. Knight designs and manufacturers proportioning and chemical dispensing equipment for the cleaning and hygiene industry. Knight has pioneered many of the standard dispensers on the market today and enjoys worldwide renown as a solutions provider for their institutional markets including cleaning, ware wash, and laundry as well as other markets such as: food & beverage, dairy, industrial and healthcare. For further information on Knight visit
www.knightequip.com.

Lafferty Equipment, part of CFS Technologies, was founded in 1976 and designs and manufactures the highest performing and most durable chemical dispensing equipment for solving cleaning and application challenges. The company is headquartered in North Little Rock, Arkansas. For more information visit www.laffertyequipment.com.

LAMBRECHT meteo, part of AE Monitoring, develops and manufactures world-class meteorological sensors and measurement solutions for wind, precipitation, pressure, temperature, and humidity. They are engaged in the development of instruments serving various classical meteorological and highly specific environmental and industrial end-markets. The company is headquartered in Göttingen, Germany. For more information, visit www.lambrecht.net.

LAR Process Analyzers AG, part of Process Insights, develops and manufactures advanced solutions for water analysis. The company’s key competence is the measurement of various water parameters – concentrating on TOC, TC, TOD, COD, BOD, TNb and toxicity – based on high-temperature combustion analyzer. In addition to its German Headquarters, LAR has opened a regional support office in China. For more information visit www.lar.com.

Lavo Solutions, part of CFS Technologies, was established in 2018 by industry experts who wanted to provide customers with a full line of accurate chemical dispensing solutions and data analytics for the cleaning and hygiene industry. Lavo is headquartered in Laguna Hills, California. For more information visit www.lavosolutions.com.

LRE Water, part of Spheros Environmental, was founded in 1970 and is headquartered in Denver, Colorado. LRE Water specializes in providing technical expertise in water resources with a particular focus on water rights, ground/surface water management and planning, and environmental management. For more information visit www.lrewater.com.

MBW Calibration, part of Process Insights, was founded in 1962 as a designer and manufacturer of dew point mirrors. Today, MBW Calibration is the world leader in designing and manufacturing high-quality, chilled-mirror dew point hygrometers used in a variety of humidity calibration, humidity measurement and gas quality applications. Additionally, MBW dew point mirrors continue to be the chosen global transfer standards for inter-laboratory comparisons. More information about the company can be found by visiting www.mbw.ch.

Messmer Büchel, part of Industrial Physics, and is headquartered in the The Netherlands. The Company produces test instruments, with specific focus on applications for the paper and board industry. Messmer Büchel was founded in 1929, and throughout its long history has produced instruments are known for their reliability and accuracy throughout their entire lifespan. For more information, visit www.messmerbuchel.com.

OneRain Incorporated, part of AE Monitoring, was founded in 1992 and is headquartered in Longmont, Colorado, with additional offices in Australia and Germany. OneRain has helped shape the next generation of real-time hydrometeorological monitoring technology, allowing clients to optimize water management, heighten regulatory compliance, achieve successful civil works, and save lives. For more information visit www.onerain.com.

OxySense, part of Industrial Physics, is a leading provider of oxygen measurement systems and permeation testing solutions. OxySense optical oxygen analyzers, oxygen permeation measurement/OTR system and oxygen measurement accessories serve the needs of packaging labs, packaging quality control labs, processors and packagers. The OxySense oxygen measurement system is unique for its ability to measure oxygen non-invasively, and its ability to measure oxygen in headspace as well as dissolved in liquids. For more information, visit www.oxysense.com.

Process Sensors, a product brand of KPM Analytics, is a leader in on-line near infrared (NIR) moisture sensor technology for the continuous monitoring and measurement of moisture, coat weight, oils and other constituents, in the manufacture of food products (including snack foods), animal food, wood products, and tobacco, as well as the paper/converting industry, the chemical industry, minerals and various bulk materials, and a wide diversity of other manufacturing industries throughout the world. Production is located in Westborough, MA, USA, with global sales and support. For more information, visit
www.kpmanalytics.com/brands/process-sensors-corporation.

ProPhotonix, part of Exaktera, was established in 1951 and is headquartered in Salem, New Hampshire, USA, with operating facilities in Cork, Ireland and Hatfield Broad Oak, UK. ProPhotonix offers its customers complete illumination solution for their Laser and LED requirements. With its extensive experience in developing OEM LED systems and laser modules, ProPhotonix has developed unique expertise across applications including machine vision, UV curing, medical equipment, and security applications. For more information visit www.prophotonix.com.

Quality By Vision, part of Industrial Physics, is a global leader in the development and manufacture of quality and process control systems for the metal packaging industry to include; can makers, can fillers and suppliers. In 1993, Quality By Vision invented the automatic double seam inspection system, now one of the leading products in the market. The company operates out of three facilities in the USA and Europe and has an extensive independent sales and service network around the world. For more information, visit www.qbyv.com.

Ray-Ran Test Equipment Ltd., part of Industrial Physics, was founded in 1977 and headquartered in Warwickshire, UK. Ray-Ran designs, manufactures and services instruments for the polymer industry for measuring materials properties such as Impact, Melt Flow, HDT- Heat Distortion, Density, Sample Preparation, Coefficient of Friction, Dart Impact and other polymer testing devices. For more information, visit www.ray-ran.com.

Sensortech Systems, a product brand of KPM Analytics, is a leader in moisture measurement and control instrumentation based on Near Infrared Reflectance (NIR) and Radio Frequency (RF) technologies. Sensortech instruments are operational in a diverse range of industries around the world, providing productivity enhancing benefits, effective process control, and quality assurance. The product line provides a real-time moisture measurement so industrial customers receive continuous data without the need to take samples to the laboratory and wait hours for the results. Production is located in Westborough, MA, USA, with global sales and support. For more information, visit www.kpmanalytics.com/brands/sensortech-systems.

Sightline Process Control, a product brand of KPM Analytics, provides vision systems and automation inspection solutions to food manufacturers around the world. Sightline products offer standard, ‘off the shelf’ inspection systems as well as customized, ‘turn-key’ solutions for complex applications. Sightline manufacturing is located in Ottawa, Ontario, Canada, with global sales and service. For more information, visit www.kpmanalytics.com/brands/sightline-process-control.

Smart Vision Works, a product brand of KPM Analytics, specializes in computer vision systems developed with advanced artificial intelligence technology for a wide range of customers - from startups to Fortune 500 companies. The company provides hi-tech solutions for inspection, sorting and foreign material detection applications across many food production industries. For more information, visit www.smartvisionworks.com.

Steinfurth, part of Industrial Physics, designs, manufactures, and services electromechanical measuring systems for the beverage, packaging, food, and pharmacy industry. In the past 40 years, Steinfurth has become a global leader in CO2 measuring instruments, torque testers, logger systems, package testing equipment, and carbonation systems. For more information, visit www.steinfurth.com.

Sonoma Technology, part of Spheros Environmental Group, was founded in 1982 and is headquartered in Petaluma, California. Sonoma Tech specializes in providing environmental solutions with a particular focus on air quality and meteorology. For more information visit www.sonomatech.com.

Systech Illinois, part of Industrial Physics, manufactures high sensitivity, trace oxygen and moisture sensors and systems for use in measuring gas transfer rates in packaging materials, modified atmosphere gas detection and analysis and process gas applications. As an industry standard throughout the world, Systech Illinois provides high sensitivity and repeatable test systems to meet the needs of plastic, food, pharmaceutical, medical device and industrial clients. The company is committed to meeting the quality requirements of customers and is poised to continue to aid manufacturers in meeting the test method standards and regulations developing across the world. For more information, visit www.systechillinois.com.

Technidyne Corporation, part of Industrial Physics, is a manufacturer of instrumentation for the precise measurement and control of the optical, surface and physical properties of paper and related products. Its international reputation for excellence in products, service, and support have garnered a reputation for being the leading optical properties measurement supplier dedicated to serving the pulp and paper industry. For more information, visit www.technidyne.com.

Tiger Optics, part of Process Insights, offers gas analyzers, as well as atmospheric and cleanroom monitors based on Cavity Ring-Down Spectroscopy (“CRDS”) technology, a breakthrough discovery by Professor Kevin Lehmann, Ph.D., of Princeton University. Tiger Optics is headquartered in Warrington, PA in the Philadelphia suburbs. From the cleanest of semiconductor fabs to the harshest coal-fired power plants, Tiger analyzers work to improve yields, reduce costs, and simplify regulatory compliance. For more information, visit www.tigeroptics.com.

TM Electronics, part of Industrial Physics, manufactures automated, high technology leak testers, leak and flow testers and package testers. High resolution, repeatable, and downloadable, TM’s test systems span the range of leak and package testing needs for medical device, plastic, food, pharmaceutical and automotive industries. The company is committed to meeting the quality requirements of customers and is poised to continue to aid manufacturers in meeting the test method standards and regulations developing across the world. For more information, visit www.tmelectronics.com.

Testing Machines, Inc. (TMI), part of Industrial Physics, was founded in 1931 and is headquartered in New Castle, DE. TMI manufactures and markets materials testing instruments for the paper, pulp, film, foil, ink, coatings, nonwoven and corrugated industries. TMI has a network of sales offices and agents throughout the US and globally in over 50 countries. Its market leading products hold #1 market positions in the measurement of friction, thickness, adhesion, and package seal testing. For more information, visit: www.testingmachines.com.

TQC B.V., part of Industrial Physics, designs and produces field measuring instruments and lab equipment for testing paint and coatings and general surface treatment delivering solutions for every possible QC-application in surface technology. TQC products are known for their ergonomic features and user friendliness and are being used by renowned manufacturers all over the world. TQC’s production facility is located in Rotterdam, The Netherlands. For more information visit www.tqc.eu.

United Calibration Corporation, part of Industrial Physics, is a premier manufacturer of state-of-the-art material testing systems. Founded in 1964 and headquartered in Huntington Beach, CA, United provides a diverse line of material testing equipment to accommodate virtually any material or force testing requirement. United offers universal testing machines for compression and tensile testing, hardness testers, material test fixturing, accessories and software and related calibration services throughout the U.S. and internationally through a network of factory authorized representatives. For more information, visit www.unitedtesting.com.

Unity Scientific, a product brand of KPM Analytics, is a leader in analytical instrumentation for quality control applications within production processes and laboratory environments. The Unity product portfolio includes near infrared (NIR) spectrometers for analyzing moisture, fat/oil, protein, and other constituents for the food and dairy, agricultural and environmental markets. Production is located in Westborough, MA, USA. For more information, visit www.kpmanalytics.com/brands/unity-scientific.

Vieux & Associates, Inc., part of AE Monitoring, was founded in 1992 and is dedicated to developing and supporting advanced technologies for rainfall and runoff products/services serving wet weather, stormwater, flood, and water resources applications. Vieux employees are located in Oklahoma, Colorado, Texas and New York. Professional affiliations include the American Meteorological Society, the National Hydrologic Warning Council, and the Water Environment Federation. For more information visit www.vieuxinc.com.

Z-LASER GmbH, part of Exaktera, was founded in 1985 and is headquartered in Freiburg, Germany with additional offices in Italy and Canada. Z-LASER specializes on providing laser-based solutions for positioning and measurement solutions. For more information visit www.z-laser.com.